SSD not recognised (VMware vSphere 6 / HP ProLiant DL180 G6 Server)

Hi Gang!

noobie here. I've tried to set correcltly my SSD (as indicated in link below with no luck:

[root@exsi:~] esxcli storage nmp device list

naa.600508b1001c2aa26bc5b479dd63f79e

   Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c2aa26bc5b479dd63f79e)

   Storage Array Type: VMW_SATP_LOCAL

   Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration.

   Path Selection Policy: VMW_PSP_FIXED

   Path Selection Policy Device Config: {preferred=vmhba1:C0:T0:L5;current=vmhba1:C0:T0:L5}

   Path Selection Policy Device Custom Config:

   Working Paths: vmhba1:C0:T0:L5

   Is USB: false

Enabling the SSD option on SSD based disks/LUNs that are not detected as SSD by default (2013188) | VMware KB

esxcli storage nmp satp rule add --satp=SATP_TYPE --device naa.600508b1001c2aa26bc5b479dd63f --option "enable_ssd"

SSH is replying:

Plugin 'SATP_TYPE' is not a registered SATP. Please select a plugin from the list in 'esxcli storage core plugin registration list -N SATP' or use the --force option to force the use of this SATP.

Same goes with other commands as indicated in link...

Thanks for your attention.

~m