Hi,
I've created (lab) a 3 node vSAN cluster with quickstart and then expanded it with a fourth. (vSphere 6.7)
All fine but health checks.
Host compliance check for hyperconverged cluster configuration says vmks are not compliant the added host has no info.
Recomendation is to appy hyperconverged config to the host, but I'm having a hard time to understand how to do so.
If I go to quickstart, in step 2 it says "Hosts: 4 (1 not configured) "
Add seems not to be an option, and re-validate changes nothing.
VMware Knowledge Base says to open the "Configure cluster" wizard in cluster → Configure → Configuration → Quickstart to apply the hyperconverged cluster configuration to this host.
Help ?
BTW, there is an "All required hosts are in maintenance mode" as if something was going to be changed that needed maintenance, but even putting all hosts in maintenance does not create a fix action I can identify.
Clicking configure in the panel 3 (which I was blind to since the error is shown in panel 2) yields "Permission to perform this operation was denied".
